Guide · How-to

How to buy a VPS with crypto, step by step

From choosing a coin to your first SSH login. For people who want to pay for a server without a card, and without the payment becoming the weakest link.

Updated 16 November 2026 · 9 min read · By the VeilVPS team

Buying a VPS with crypto is about as easy as buying one with a card. The difference is in the details. The coin you pick decides how much of the payment is public. Where the coins come from decides whether the payment points back to you. And ten minutes of setup after the server boots decides whether it stays yours.

The steps below follow the checkout for a crypto VPS at VeilVPS, where every order is paid straight to our own wallets and checked by hand. Most of it applies to any host that accepts cryptocurrency.

The short version

  1. Choose a plan and a location.
  2. Choose a coin based on privacy, speed and fees.
  3. Move the coins to a wallet you control.
  4. Place the order, keep the private order link and create an SSH key.
  5. Send the exact amount before the 30-minute rate lock runs out.
  6. Wait while the network confirms the payment and we check it. Your server access then appears on your order page.
  7. Secure the server on first login.

Step 1: Choose a plan and a location

Plans start at $7.50 a month and cost the same in every location. Compare plans and specs before you order. Location is the harder thing to change later, since moving means a new server and a new IP address.

As a rough guide, 1 vCPU and 2 GB of RAM is plenty for a VPN, a Tor relay or a small website. Container stacks and databases want 4 GB or more. A full archival Bitcoin node needs more disk than any of our plans, so run it pruned.

Location is a question of law and latency. Our offshore VPS page sums up the options.

Step 2: Choose a coin

The coins we accept differ in what the payment reveals, how fast it confirms and what it costs to send.

Bitcoin: widely held, fully public

Paying for a VPS with Bitcoin works from almost any wallet. The catch is that Bitcoin's ledger is public and permanent. Every amount and every address is visible to anyone, and analytics companies make a living linking addresses into clusters. If any address in your payment's history is tied to your name, an exchange withdrawal for example, the payment is too.

Bitcoin needs 1 confirmation, usually 10 to 30 minutes. Fees depend on how busy the network is. We accept on-chain Bitcoin only. We do not accept Lightning payments.

Monero: private by default

Monero hides what Bitcoin exposes. Ring signatures mix the coins you spend with decoys from the blockchain, so an observer cannot tell which one was really spent. Stealth addresses send each payment to a one-time address, so the recipient's public address never appears on chain. Ring confidential transactions (RingCT) hide the amount.

It is not magic. Timing, the IP address your wallet uses to reach a node, and the records of the exchange you bought from all still exist. For a Monero VPS payment, the ledger shows that a transaction happened, when, and its fee, but hides the sender, the receiver and the amount. We wait for 10 blocks, about 20 minutes, which matches the 10-block lock Monero puts on newly received funds.

Litecoin: Bitcoin-style, faster and cheaper

Litecoin works like Bitcoin, with a public ledger and the same privacy limits, but blocks come about every 2.5 minutes and fees are lower. Confirmation usually takes a few minutes.

USDT: stable price, two extra risks

Tether is useful if you do not want the price to move between buying the coins and paying. We accept it on TRC-20 (Tron) only, and a TRC-20 transfer usually confirms in about a minute. Two things to know first:

  • The issuer can freeze addresses. Tether can blacklist an address, and USDT in a frozen address cannot be moved. That is part of how the token is built, and it has been used.
  • The ledger is public. Tron is as transparent as Bitcoin.

You also need some TRX, Tron's own coin, to pay the transaction fee. Send on TRC-20 only. USDT sent on another network, ERC-20 included, does not reach us and cannot be recovered.

Which coin to pick

For privacy, Monero. For low fees, Litecoin. For a stable price, USDT, if you accept the freeze risk. Bitcoin and Litecoin are fine as long as you take care over where the coins come from, which is the next step.

Step 3: Move the coins to a wallet you control

The most common mistake is paying straight from an exchange account. In most countries, exchanges must verify your identity and keep records of every withdrawal, including the destination address. Pay from there and the exchange's records connect your name to your hosting payment. Many exchanges also take their withdrawal fee out of the amount sent, so the payment arrives short.

The usual fix is to withdraw to a self-custody wallet first, then pay from that wallet. Know its limit: on Bitcoin, Litecoin and USDT this only adds one public hop. The exchange still knows the address it paid, and the ledger shows where the coins went next. Of the coins we accept, only Monero breaks that link.

Use a self-custody wallet

Self-custody means you hold the seed phrase, not a company. For Bitcoin, Sparrow and Electrum are long-standing desktop wallets with good fee control. For Monero, Feather and the official Monero GUI wallet. Write the seed phrase down on paper before you send anything to a new wallet.

Keep hosting funds separate

Use a separate wallet, or at least a separate account inside one, for paying hosting. On Bitcoin and Litecoin, every time a transaction combines coins from different sources, it links those sources together in public. Wallets with coin control let you choose exactly which coins a payment spends. Do not reuse addresses.

Stay on the right side of the law

Keeping your hosting separate from your identity is legal, and it is the point of this step. Hiding money from people with a lawful right to see it is not. Buy your coins through lawful channels and keep the records your tax authority expects: in many countries, spending crypto counts as a disposal that may be taxable. Stay away from mixing services, several of which have been sanctioned or prosecuted.

Step 4: Place the order and create an SSH key

The order form asks for a plan, a billing period, a location, an operating system and a coin. There is no account to create and no password to choose. An email address is optional and only used if we need to reach you about the order, so a separate mailbox works fine. You can also order through our Tor mirror at veilvpsxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.onion.

After you submit the form, you land on a private order link. Save it, ideally in a password manager. It shows what to pay, the status of your order and, later, your server access. Without an email, it is the only way back to your order, and we cannot resend it.

We deliver the server with a password, and you switch to an SSH key at first login. Create the key now:

ssh-keygen -t ed25519 -C "vps-2026"
cat ~/.ssh/id_ed25519.pub

By default, ssh-keygen writes your local username and hostname into the key's comment, and that comment ends up on the server. The -C flag replaces it with a label of your choice. You copy the public key to the server in step 7. The private key never leaves your machine.

Step 5: Send the payment

Your order page shows the exact amount in the coin you chose, our wallet address, the network to use and a countdown. The USD price is converted at the current rate. The payment goes from your wallet straight to ours, with no payment processor in between.

The 30-minute rate lock

The amount is locked for 30 minutes. Pay inside that window and the amount on your order page is what you owe, whatever the market does in the meantime. If the window runs out before you pay, get a new amount at the current rate from the same page. You can switch to another coin there too.

Send the exact amount

The network fee comes on top of the amount shown, not out of it. Some wallets have a "subtract fee from amount" option. Leave it off, or the payment arrives short.

Use a normal fee

On Bitcoin, a fee far below the going rate can leave your transaction waiting in the mempool until the window has closed. Use your wallet's suggestion for confirmation within the next few blocks. Then copy the transaction ID (txid) and paste it on your order page. It helps us find your payment faster, and it is your receipt.

Step 6: Wait for confirmation and delivery

Once the payment is seen on the network, it needs enough confirmations to be final. We then check it by hand, set up your server and put its IP address, user and password on your order page. That usually happens within a few hours.

Confirmation times by payment method
CoinWhat to expect
Monero XMR Strongest payment privacy. Confirmed after 10 blocks (~20 min).
Bitcoin BTC On-chain, 1 confirmation.
Litecoin LTC Low fees, a few minutes.
Tether USDT TRC-20 only. Stable price.

Block times are averages. Now and then a Bitcoin block takes 30 minutes or more to arrive, and nothing is wrong when it does. The server's access appears on your order page as soon as it is ready.

If the payment is short or late

Most payment problems come from one of three things: an exchange fee taken out of the amount, a payment sent after the rate lock expired, or a token sent on the wrong network. In each case, contact support before you send anything else, and include:

  • your order ID;
  • the coin and network you used;
  • the transaction ID and the amount sent;
  • the time you sent it, with your timezone.

Support will tell you how to settle it. Never send a seed phrase or private key to anyone who offers to fix a payment, including someone claiming to be us. No legitimate support desk needs them.

Step 7: Secure the server on first login

These commands assume Debian or Ubuntu; other distributions have direct equivalents. Replace the example IP with yours, and the user name with whatever your order page shows if it is not root.

Add your key, change the password and update

ssh-copy-id -i ~/.ssh/id_ed25519.pub [email protected]
ssh [email protected]
passwd
apt update && apt full-upgrade -y
apt install -y unattended-upgrades
dpkg-reconfigure -plow unattended-upgrades

ssh-copy-id asks once for the password from your order page, then copies your public key to the server. Change that password with passwd straight away, since it was shown on a web page. On first connection, SSH shows the server's host key fingerprint. If your provider displays it, compare the two before you type yes. Reboot if the update installed a new kernel. Unattended upgrades then applies security updates on its own.

Create a normal user and close root login

adduser deploy
usermod -aG sudo deploy
install -d -m 700 -o deploy -g deploy /home/deploy/.ssh
install -m 600 -o deploy -g deploy ~/.ssh/authorized_keys /home/deploy/.ssh/

cat > /etc/ssh/sshd_config.d/10-hardening.conf <<'EOF'
PermitRootLogin no
PasswordAuthentication no
KbdInteractiveAuthentication no
EOF
sshd -t && systemctl reload ssh

Before you close your current session, open a second terminal and check that ssh [email protected] works and that sudo works. If something is wrong, the first session is still your way back in.

Turn on a firewall

apt install -y ufw
ufw default deny incoming
ufw default allow outgoing
ufw allow OpenSSH
ufw allow 443/tcp    # only if you serve HTTPS
ufw enable

Allow SSH before you enable the firewall, or you lock yourself out. One known trap: Docker writes its own iptables rules, so ports published by containers bypass ufw. Bind containers to 127.0.0.1 unless they really need to be public.

Optional: encrypt the disk

Every plan supports a custom ISO, which we mount on request: email support with your order ID. If you install from one with full-disk encryption, powered-off disks, snapshots and retired drives are unreadable without your passphrase, to us as well. While the server runs, the key sits in RAM, which the hypervisor can technically read. You will need to enter that passphrase after each reboot, for example over SSH with dropbear in the initramfs.

Renewals are payments too. About 7 days before the term ends, a reminder appears on your order page. To renew, place a new order for the same plan with your current order ID in the note, and pay it from the same separate wallet.

Root once we confirm your payment. Your name stays out of it.

Pick a plan, pay with the coin you prefer, and SSH in. From $7.50/month, no contract.